Own workshop · Over 25 years in Mallorca

Air Conditioning Ductwork in Sóller

We fabricate the ductwork to measure and install it ourselves. Free survey in Sóller and a fixed written quote within 48 hours.

Steel · Fibreglass · Spiral · Stainless Fixed written quote within 48 hours

25

Years in the trade

5

Fitters on the team

48

Hours to your quote

100

% Mallorca

What we do

We fabricate the ductwork in our own workshop and install it ourselves, island-wide.

🌬

Ducted air conditioning

Cooling throughout the property with no units on show. We make the ductwork to measure and install it.

🧱

Fibreglass ductwork

The usual duct for interior residential work. Factory insulated, light, and it absorbs air noise.

🔩

Galvanised steel ductwork

Tougher, for outdoors, roofs and exposed runs. Insulated with a wrap and foil so it does not condense.

Spiral ductwork

Round steel duct, for exposed runs in warehouses and commercial units or where a lot of air has to move.

🛡

Stainless steel ductwork

For kitchen extraction and seafront properties. AISI 304 and 316, made to measure in our own workshop.

🍳

Kitchen extraction

Canopies, stainless ductwork, make-up air and roof discharge. For restaurants, bars and hotels.

💨

Ventilation and fresh air

Extract and supply air for warehouses, car parks, shops and offices. Sized for how the space is actually used.

🏭

Fabricación a medida

Cortamos y plegamos en nuestro taller antes de pisar la obra. Y servimos a instaladoras a precio de industrial.

🚗

Ventilación de garajes

Para comunidades y administradores de fincas. Si tiene un requerimiento, se lo miramos antes de presupuestar.

Work we have done

Red de chapa, fibra en falso techo, helicoidal visto y extracción de cocina.

Climaver fibreglass duct installed above the ceiling with brackets Finished ductwork in a home before the ceiling goes up Indoor unit connected to the ductwork through a fibreglass plenum Fibreglass duct with a bend suspended from the slab on site

What the work is like in Sóller

Sóller has something no other Tramuntana town has: a large centre of three-storey townhouses, and a port three kilometres away with a completely different profile.

In the town we work on a lot of old houses with courtyards, stone staircases and ceilings that change height between the main floor and the one above. Many are listed, so the first thing is knowing what can be touched.

The Port has hotels, seafront restaurants and seasonal apartments. There, salt air rules and so does the calendar: whatever gets done, gets done with the business closed.

And through the valley, among the orange groves, there are converted fincas and agrotourism where what is asked for is that the unit cannot be heard.

We cover the whole municipality, including Port de Sóller, L'Horta, Biniaraix and Binibassí.

Stone walls, timber beams and narrow streets

In the Tramuntana no two houses are alike, and almost none was built with ductwork in mind. Half-metre stone walls, vaulted floor structures, exposed timber beams the owner has no intention of hiding, and ceilings that change height from room to room.

Here the route is the project. It is not drawn in an office: it is drawn in the house, going up to look at what sits above each ceiling. Sometimes the right route is not the short one, it is the one that does not force you to touch a beam.

Exposed beams stay exposed. If the owner wants to keep them, and they almost always do, the duct goes wherever it can be hidden: a cupboard, a corridor, a loft. It can be done, but it has to be drawn beforehand, not improvised.

The facade is usually listed. That governs where the outdoor unit can go and how the duct can reach the roof. We look at it with you and, if needed, propose the solution the town hall will actually accept rather than the one that causes trouble.

And access. Single-car streets, nowhere to park, sometimes steps. Fabricating the ductwork in our workshop and bringing it up ready is not a bonus here: it is the only way to do the job without blocking the village for three days.

Right by the sea an installation does not age the same way. The air carries chlorides, and chloride eats the zinc off galvanised steel well before its time. Ductwork that would last inland starts pitting here within a few years.

The survey costs nothing. We come to Sóller, measure what is there, and within 48 hours you have the quote in writing, with the metres, the materials and the days on site. What we sign is what you pay.

We also work near Sóller

Other municipalities in Serra de Tramuntana where we install ductwork:

Andratx Banyalbufar Bunyola Calvià Deià Esporles Fornalutx Pollença Puigpunyent Valldemossa

¿Tienes una obra? Te llamamos hoy.

Déjanos tus datos y te llamamos para concertar la visita. Medimos y en 48 horas tienes el presupuesto por escrito.

Submitting opens WhatsApp. You accept our legal notice and privacy policy.

O si lo prefieres, escríbenos por WhatsApp

In short: Conductos Mallorca fabricates and installs air conditioning ductwork, ventilation and kitchen extraction in Sóller (Serra de Tramuntana, Mallorca), with over 25 years in the trade and a team of 5 technicians on the payroll. We cover the whole municipality, including Port de Sóller, L'Horta, Biniaraix and Binibassí. We work in galvanised steel, Climaver-type fibreglass, spiral duct and stainless steel, fabricated to measure in our own workshop and installed by our own team. In stone houses with exposed timber beams the route is studied in the house itself and the ductwork is fabricated in the workshop so it can be installed in narrow streets. The installation is handed over complete, with the refrigeration side executed and certified by a registered installer. The survey in Sóller is free and without obligation, and the fixed written quote follows within 48 hours. Telephone: 631 651 622.

Frequently asked questions

My house in central Sóller is listed. How do I get the duct out?

Usually through the internal courtyard, which allows a route to the roof without touching the facade. But it depends on exactly what is listed in your case. We look at it at the survey and propose the solution the town hall will accept.

I have exposed timber beams and I do not want them covered. Is it possible?

Almost always yes, but the route has to be drawn first. The duct goes wherever it can be hidden — cupboard, corridor, loft — and that governs where the unit goes. This is not a job that can be quoted over the phone: it has to be seen.

The street is very narrow. Can you work there?

Yes. We fabricate in our workshop and bring the ductwork up ready, precisely so we do not have to set up a workshop in the street or block the village for days.

About us

Conductos Mallorca fabricates and installs ductwork for air conditioning, ventilation and extraction across the island.

Experience

Over 25 years fabricating and installing ductwork in Mallorca: steel, fibreglass, spiral and stainless.

Our own team

Five fitters on the team. We do not subcontract: the person who quotes the job is the person who fits it.

Own workshop

Ductwork is fabricated before we set foot on site. Fewer days working inside and far less dust.

Fixed quote

In writing within 48 hours of the survey, with the metres, the materials and the timescale. What we sign is what you pay.

Conductos Mallorca · Tel. 631 651 622 · Servicio en toda Mallorca (Illes Balears) · Legal notice

We cover the whole island

Palma, the coastal resort areas and every other municipality on the island.

All of Mallorca Palma Calvià Andratx Llucmajor Marratxí Alcúdia Pollença Manacor Santanyí Sóller Capdepera Son Servera Sant Llorenç des Cardassar Felanitx Campos Muro Artà See all 53 municipalities
📞 Call · 631 651 622Free survey · quote in 48 h 💬